Support Code 5100 Appears - G7020 Article ID: ART175774 | Date published: 11/29/2019 | Date last updated: 08/10/2023 . Or if you still need help, visit our Canon Community by clicking the button below to get answers: _____ If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
List of Support Code for Error. 5100. Cause. Printer error has occurred. What to Do. If you are printing, press the printer's Stop button to cancel printing, then turn off the printer. Check the following: Make sure print head holder motion is not impeded by protective material and tape for securing the print head holder, jammed paper, etc.
With the Power button still held, press the Stop button 5 times to make the printer enter the Service Mode, and then release the Power button. Next, press the Stop button thrice and then the Power button once to print a Service Page. Finally, press the Stop button 5 times, followed by the Power button one last time.
Reconnect the data cable (not applicable to Wi-Fi, Bluetooth or Infrared). Press Power to turn the printer back on, then trying printing again. If the printer still doesn't work correctly, and the carriage is accessible, remove and replace the ink. Please repeat the steps above. If the steps provided do not resolve this concern, it suggests
Check the remaining ink level, and then refill the ink tank if necessary. Turn off the machine and unplug it. Wait about 10 minutes. Plug in the machine again and turn it back on. If the ink tank is refilled because it runs out of ink, perform system cleaning. To perform system cleaning, press and hold the Stop button until the Alarm lamp
Tech #1: 5012 indicates that your printer has encountered an internal hardware malfunction. Please follow the steps below. 1. Check the inside of your printer for jammed paper and obstructions. Click the following link for details. 2. Next, make sure that your ink tanks are inserted correctly. 3..